Filter
Top Products
20
Load a fully charged BP-511A battery pack into the camera.
1
Open the battery compartment
cover.
¡ Slide the lever as shown by the arrow
and open the cover.
2
Insert the battery.
¡ Point the battery contacts downward.
¡ Insert the battery until it locks into
place.
3
Close the cover.
¡ Press the cover until it snaps shut.
When the <4> switch is set to <1> or <J> (p.26), the battery
level will be indicated at one of three levels.
z : Battery level OK.
x : Battery level is low.
n : Battery must be recharged.
Installing and Removing the Battery
Installing the Battery
Checking the Battery Level
Battery Pack BP-514, BP-511, or BP-512 can also be used.