Filter
Top Products
83: Custom ControlsN
418
When you press the button assigned to this function, metering and AF
are executed.
*1:When assigned to the <p> or <A> button,
pressing the <B> button while the setting
screen is displayed will enable you to set the
detailed AF settings. When shooting, pressing the
<p> or <A> button will execute AF as it was
set.
AF start position
When [Registered AF point] is set, you can press the <p> or
<A> button to switch to the registered AF point.
Registering the AF Point
1. Set the AF area selection mode to one of the following: Single-
point Spot AF (manual selection), Single-point AF (manual
selection), AF point expansion (manual selection ), AF point
expansion (manual selection, surrounding points), or 61-point
automatic selection AF. Zone AF (manual selection of zone)
cannot be selected.
2. Select an AF point manually.
3. Hold down the <S> button and press the <U> button. A beep
will sound and the AF point will be registered. If the AF area
selection mode is set to any setting other than 61-point automatic
selection AF, the registered AF point will blink.
: Metering and AF start
When the AF point is registered, the following will be displayed:
• 61-point automatic selection AF: HP (HP: Home Position)
• Spot AF, 1 pt AF, Expand AF Area: SEL (Center), SEL HP (Off
center)
To cancel the registered AF point, hold down the <S> button and press
the <m> button. The registered AF point will also be canceled if you
select [54: Clear all camera settings].