Filter
Top Products
179
You can change the color of the ring using the separately sold Ring
Accessory Kit RAK-DC-2.
Remove the ring.
● Be sure the camera is turned off.
● While pressing the ring release button
( ), turn the ring in the direction of the
arrow ( ).
● When the “{” mark on the ring and the “z”
mark on the camera are aligned, lift off the
ring.
Attach the ring.
● Align the “{” mark on the ring with the “z”
mark on the camera and turn the ring in the
direction of the arrow.
By using the RS60-E3 Remote Switch (sold separately), you can avoid any
camera shake that may occur when you press the shutter button. The remote
switch is useful when using slow shutter speeds.
Connect the remote switch.
● Be sure the camera is turned off.
● Open the terminal cover and insert the
remote switch plug.
Shoot.
● Press the release button on the remote
switch to shoot.
Changing the Ring Color (Sold Separately)
Using the Remote Switch (Sold Separately)
Bulb photographs cannot be taken with this camera.
COPY