Using an Externally Mounted Flash (Sold Separately)
187
*1 Fixed to [Manual].
*2 1/64 for Speedlite 220EX, 270EX, 430EX II, Macro Ring Lite MR-14EX and Macro Twin Lite MT-
24EX.
*3 Not available with Speedlite 220EX.
*4 Fixed to [On].
*5 Settings aside from On/Off are set on the flash. Not available with Speedlite 220EX, 270EX and
430EX II. When set to [On], [Shutter Sync.] cannot be set to [2nd-curtain]. Even if you set [Shutter
Sync.] to [2nd-curtain] on the camera, it will change to [1st-curtain].
*6 Fixed to [Off].
*7 [Slow Synchro], [Safety FE], [Red-Eye Corr.] and [Red-Eye Lamp] can also be returned to their
default values using [Reset All] in the camera’s 3 menu (p.51). Not available with Speedlite220EX.
• The settings from the flash are applied to the flash mode, flash exposure compensation,
flash output, shutter synchro, and wireless function when you turn on the camera.
• The following functions can also be used:
- Auto Exposure (Set the camera to E-TTL mode)
- FE Lock (When [Flash Mode] is set to [Auto])
- Auto Zoom (Not available with the 220EX or 270EX)
Other Canon flashes
Canon flashes other than the Speedlite EX series will fire at their full strength. For
the optimal aperture values and ISO speeds for the distance to the subject, refer
to the guide number listed in the flash’s user guide.
• For continuous shooting, the flash can be used in quick flash mode (pilot
lamp lit green). In this case, flash output may be less than with full flash
(pilot lamp lit red) (580EX II only).
• If the external flash has been set to stroboscopic flash, the flash’s set-up
menu cannot be chosen (580EX II only).
COPY