Filter
Top Products
Shooting with Servo AF
94
Complete the settings.
● Press the button.
While the shutter button is pressed halfway, the focus and exposure will
continue to adjust, allowing you to take pictures of moving subjects without
missing a shot.
Choose [Servo AF].
● Press the n button to choose [Servo
AF] in the 4 tab, then press the qr
buttons to choose [On].
Focus.
● The focus and exposure will be maintained
where the blue AF frame appears while
you press the shutter button halfway.
• The Spot AE Point frame can be linked with the AF frame (p. 101).
• The AF frame will be set to normal size when using Digital Zoom (p. 58)
or Digital Tele-converter (p. 59).
Shooting with Servo AF
• The camera may not be able to focus in some conditions.
• In low light conditions, AF frames may not turn blue even after pressing
the shutter button halfway. In this case, you can set the focus and
exposure with the AF frame setting.
• If a correct exposure cannot be obtained, the shutter speed and aperture
value appear in orange. Release your finger from the shutter button, then
press it again halfway.
• You cannot shoot with the AF lock in this mode.
•
The [AF-Point Zoom] option in the
4
tab is not available in Servo AF mode.
• Not available when using Q (p. 56).
COPY