Canon HF20 A Camcorder User Manual


 
124 External Connections
When the data requires multiple discs
After a disc is finalized, it will be ejected automatically and a message
will appear. Insert the next disc and close the disc tray.
To create an additional copy of the same disc
After the operation is finished, insert a brand new disc, close the disc
tray and repeat the operation.
IMPORTANT
AVCHD discs containing scenes recorded in MXP mode cannot be cre-
ated with the optional DW-100 DVD burner. Use the software on the
supplied Video Tools CD-ROM to save such scenes.
While the camcorder is connected to the DVD Burner, do not open the
memory card slot cover and do not remove the memory card.
Observe the following precautions while the ACCESS indicator on the
camcorder is on or flashing. Failing to do so may result in permanent
data loss.
- Do not open the memory card slot cover.
- Do not disconnect the USB cable.
- Do not disconnect the power source or turn off the camcorder or the
DVD Burner.
- Do not change the camcorder’s operating mode.
For important information on handling your discs, refer to
Cautions on handling.
NOTES
If a scene does not fit entirely in one disc, it may be divided and con-
tinue on the next disc.
When the camcorder contains a large number of scenes to be saved on
discs, it may take a long time for the connection to the DVD Burner
(step 2 above) to be completed. For best performance, we recommend
limiting the number of scenes to be saved to 500 or fewer scenes. (With
500 scenes, it will take approximately 3 minutes to complete the con-
nection.)
In addition to the JPG image files, Photo DVDs contain a slideshow of
all the photos saved (each played back for approximately 3 seconds).
DW-100