Filter
Top Products
Additional Information 143
System Setup 2
1
Option not available when the camcorder is connected to an HDTV using an HDMI
cable.
2
Option available only from the original movies index screen.
[Wireless Remote Control]: Allows the camcorder to be operated with the
wireless controller.
[Notification Sounds]: A beep will accompany some operations like turn-
ing on the camcorder, the self-timer countdown, etc.
[Power Saving Mode]: In order to save power when the camcorder is
powered by a battery pack, it will automatically shut off if left without any
operation for 5 minutes.
• Approximately 30 seconds before the camcorder shuts off, [Auto power
off] will appear.
• In standby mode, the camcorder will shut off after the time selected for
the [Quick Start] setting.
[Quick Start]: Select whether to activate the Quick Start function when
you close the LCD panel in a recording mode ( 48) and the length of
time after which the camcorder will end the standby mode and shut off
automatically.
Menu item Setting options
[Wireless Remote
Control]
[ On], [ Off ] zzzz–
[Notification Sounds] [ High Volume],
[ Low Volume], [ Off]
zzzz–
[Power Saving Mode] [ On], [ Off] zzzz–
[Quick Start] [ Off], [ 10 min],
[ 20 min], [ 30 min]
zz–––
[Control for HDMI]
1
[ On], [ Off] zzzz–
[Initialize / ]
[Initialize ]
[Built-in Mem.],
[Mem. Card]
zzz
2
z 43
[Quick Initialization],
[Complete Initialization]
[Photo Numbering] [ Reset], [ Continuous] zzzz–
[Firmware] – – – – z –