Canon HF20 A Camcorder User Manual


 
Video 77
To fade in/out
Activate the selected fader in record pause mode ( ), then press
to start recording with a fade in. Activate the selected
fader while recording ( ), then press to fade out and
pause the recording.
To activate an effect
mode: Activate the selected effect while recording or in record
pause mode.
mode: Activate the selected effect and then press to
record the photo.
NOTES
When you apply a fader, not only the picture but also the sound will fade
in or out. When you apply an effect, the sound will be recorded normally.
Faders cannot be used when recording video snapshot scenes or when
pre-recording is activated.
On-Screen Displays and Data Code
You can turn most on-screen displays on or off.
Repeatedly press to turn the on-screen displays on/off in the
following sequence:
, mode:
All displays on
Most displays off*
mode:
All displays on
Data code only
All displays off
mode:
All displays on
Regular displays only (removes the histogram and information icons)
All displays off
START/STOP
START/STOP
PHOTO
(34)
DISP.