Canon HF S20 Camcorder Accessories User Manual


 
To capture the photos
1 Play back the scene from which you want to capture the photo.
2 Pause the playback at the point you want to capture.
3 Press !PHOTOfully.
To capture a photo sequence, hold PHOTO I pressed down. The scene
will be played back by frames and each frame captured as a separate
photo.
4 Touch [11] to return to the index screen.
O IMPORTANT
When capturing photos on an Eye-Fi card in memory card slot I_1,pho-
tos will be uploaded automatically if you are within the range of a config-
ured network. Always verify that Eye-Fi cards have been approved in
the country/region of use. See also Using an Eye-Fi card ([_ 150).
(_ NOTES
The data code of the photos will reflect the date and time of recording of
the original scene.
Photos captured from a scene with a lot of fast movement may be
blurred.
Photos will be recorded on the memory selected for recording photos.
[Djj Photo Sequence]:
- Up to 1O0photos can be captured at a time.
- The photo sequence capture will stop when the end of the scene is
reached (playback will pause at the beginning of the following scene).
- Photos will be captured at intervals of 1/30 second (1/24 second, if
the scene was recorded at a frame rate of [F.r'_'l PF24] or [IFtrt 24F]).
DividingScenes
You can divide scenes (original scenes only) in order to leave out the
best parts and later cut out the rest.
Operatingmodes: I
t Open the[Original]indexscreen.
102 *Video