Filter
Top Products
AdvancedFunctions
ShootingVideoin M ManualMode
When the mode switch is set to M (Manual mode), you can enjoy full
access to the menus and manually adjust the exposure, focus, white
balance and many more of the camcorder's settings to your prefer-
ence. Even in mode, though, the camcorder can help you with
the settings. For example, by using Special Scene recording programs
([_} 61).
Operating modes: ....
1 Set the mode switch to M.
2 Turn on the camcorder.
By default, movies are recorded in
the built-in memory (_ only)
or on memory card _II (lll-'_l_[_). You
can select the memory that will be
used to record movies ([_ 38).
3 Press START/STOP to begin
recording.
Press _START/STOP again to pause the
recording.
0 IMPORTANT
• Observe the following precautions while the ACCESS indicator is on or
flashing. Failing to do so may result in permanent data loss or damage
to the memory.
- Do not open the double memory card slot cover.
- Do not disconnect the power source or turn off the camcorder.
- Do not change the camcorder's operating mode.
• Be sure to save your recordings regularly (1_} 130), especially after
making important recordings. Canon shall not be liable for any loss or
corruption of data.
Video • 59