Filter
Top Products
5 Charging will start when the
camcorder is turned off.
• If the camcorder was on, the green
ON/OFF (CHG) indicator will go out
when you turn off the camcorder.
After a moment, the ON/OFF (CHG)
indicator will start flashing in red
(battery pack charging). The red ON/
OFF (CHG) indicator will go out when
the battery pack is fully charged.
• Ifthe indicator flashes quickly, refer to
Troubleshooting ([_ 175).
ON/OFF(CHG)(charge) indicator
To remove the battery pack
1 Slide [BAT%R_RE_E_SE/in the
direction of the arrow and hold it
pressed down.
2 Slide the battery pack in the direction
of the arrow and then pull it out.
iMPORTANT
• Turn off the camcorder before connecting or disconnecting the com-
pact power adapter. After pressing iPOWER to turn off the camcorder,
important data is updated in the memory. Be sure to wait until the green
ON/OFF (CHG) indicator goes out.
• We recommend charging the battery pack in temperatures between
10 °C and 30 _'C(50 _'Fand 86 _'F).Outside the temperature range of
0 _'Cto 40 _'C(32 _'Fto 104 _'F),charging will not start.
• Do not connect to the camcorder's DC IN terminal or to the compact
power adapter any electrical equipment that is not expressly recom-
mended for use with this camcorder.
Preparations * 23