Filter
Top Products
Options(*Default value in mode)
[_ Dynamic]* ( mode only) Compensates for a higher
degree of camcorder shake, such as when shooting while walk-
ing, and is more effective as the zoom approaches full wide
angle.
[D Standard], [D On] Compensates for a lower degree of
camcorder shake, such as when shooting while remaining sta-
tionary, and is suitable for shooting natural-looking scenes. Use
this setting when recording movies with the optional Wide-con-
verter or Tele-converter.
[_ Off] Use this setting when the camcorder is mounted on a tri-
pod.
Powered IS
When shooting video, you can use Powered IS to make the image
stabilization even more powerful. Powered IS is most effective when
you are stationary and zooming n on far subjects using high zoom
ratios (the more you approach the telephoto end). Holding the LCD
panel with your left hand will add to the stability of the shot
Press and hold POWEREDIS as long as
you want to activate Powered IS.
• _J appears inyellow, wme
Powered IS is activated.
• YOU can cnan(
[POWEREDIS button ( ong press or
;oggle on/oft) with me _ @
[POWERED IS Button] setting.
(_) NOTES
• If the degree of camcorder shake is too high, the image stabilizer may
not be able to fully compensate.
• Powered IS is not available in mode.
• For surveying and following shots, when you pan the camcorder from
side to side or tilt it up and down, we recommend setting the ISmode
to [_ Dynamic] or [_ Standard].
Video * 65