Filter
Top Products
Printing Maintenance
53
3 Start Print Head Deep Cleaning.
(4) When the confirmation message is displayed, click OK.
Print Head deep cleaning starts when the POWER lamp starts blinking.
Important Do not perform any other operations until the Print Head deep cleaning
is completed (about two to three minutes).
(1) Click the Maintenance tab.
(2) Click Deep Cleaning.
(3) Select the Print Head to be cleaned, and
then click Execute.
Note
Click the Initial Check
Items button.
Confirmation
message for Print
Head Deep Cleaning
is displayed.
QSG_Print_Head_Deep_Cleaning.fm Page 53 Monday, October 25, 2004 2:46 PM