Filter
Top Products
Printing Maintenance
55
3 Start Print Head Deep Cleaning.
Print Head deep cleaning starts when the POWER lamp starts blinking.
Important Do not perform any other operations until the Print Head deep cleaning
finishes. This takes about two to three minutes.
(1) Select Cleaning from the
pop-up menu.
(2) Click Deep Cleaning.
(3) Select the Print Head to be cleaned,
and then click OK.
Note
Click the Initial Check
Items button.
Confirmation
message for Print
Head Deep Cleaning
is displayed.
QSG_Print_Head_Deep_Cleaning.fm Page 55 Monday, October 25, 2004 2:46 PM