Filter
Top Products
Specific Shutter Speeds and Aperture Values (M Mode)
147
Choose from the three flash levels in D mode.
Enter D mode.
Set the mode dial to D.
Configure the setting.
Press the m button, choose X in the menu,
and adjust the setting by either pressing the
op buttons or turning the 5 dial (p. 43).
• D: Manual
• Calculation of standard exposure is based on the specified metering method
(p. 121).
Adjusting the Flash Output
• You can also set the flash level by accessing n (p.44) and choosing [Flash
Output] in [Flash Settings] on the 4 tab.
• You can set the flash level in M or B mode by accessing n (p. 44),
choosing [Flash Settings] on the 4 tab, and then setting [Flash Mode] to
[Manual].
• You can also access the [Flash Settings] n screen as follows.
- When the flash is up, press the r button and immediately press the n
button.