Filter
Top Products
69
Reflection from sunlight or light from another
source
Button operation during page change
1. Incorrect camera-TV connection
2. Wrong TV set up
3. Wrong video mode is selected.
All pages are protected.
• Indicates function not available during playback.
• Memory full
• Malfunction due to static electrical charge or
strong impact.
• Camera is connected to a computer or QV Color
Printer.
Activation of the screen saver
1. Monitor screen is turned off.
2. Video cable connected to the VIDEO OUT termi-
nal.
TROUBLESHOOTING
Symptom Probable Cause Action
Color of recorded image is
strange.
No +/– button operation
during multi-page display
Camera is connected to a
TV, but LCD monitor con-
tents do not appear on TV
screen.
Delete operation does not
operate.
Menu icon is blue and noth-
ing happens when it is se-
lected.
All buttons and switches do
not operate.
Auto Play starts even
though it is not selected.
Nothing appears on the
monitor screen.
Playback
Reorient the camera so that light is not shining di-
rectly into lens.
Wait until an image is on the LCD before performing
a button operation.
1. Connect correctly using the video cable (page
64).
2. Set up the TV correctly.
3. Change the video mode.
Unprotect the page you want to delete (page 54).
Select a different function or change to the Record
Mode.
Remove batteries and disconnect the AC adaptor if
you are using one. Restore power and turn the
camera on. If this does not work, contact your
dealer or an authorized CASIO service provider.
Turn off screen saver (page 45).
1. Press the LCD button to turn on the monitor
screen.
2. Disconnect the video cable. The monitor screen
is disabled while it is connected.
Other
Deletion
70
Error during data communication. Check cable connec-
tions and mode settings.
Indicates that movie recording is not possible because
camera memory is full.
Delete images you no longer need or reduce the resolu-
tion of some of the images in camera memory.
Problem with internal memory. Perform the following
procedure.
Important!
• The following procedure deletes all images stored in
memory. You can use the optionally available connec-
tion kit (LK-10V/LK-12S/LK-22S) to make copies of
images before deleting them.
• Be sure to power the camera using the AC adaptor or
a new set of alkaline or lithium batteries when per-
forming a system reset. Weak batteries or manga-
nese batteries can result in a power failure while the
system reset operation is in progress, causing dam-
age to camera memory.
1. Hold down ZOOM and MENU
at the same time.
2. After checking that the SYSTEM RESET message is
on the display, press the shutter button to perform a
system reset or turn power off if you do not want to
perform a system reset.
• Never turn off power while system reset is in progress!
Doing so will damage camera memory are require
servicing by an authorized service provider!
• If the MEMORY ERROR message continues to ap-
pear on the display after you perform the reset proce-
dure, contact your nearest CASIO service provider.
ERROR
FULL
MEMORY ERROR
#1, #3
CONSULT THE
OWNER’S MANUAL!
MESSAGES
3. After the final “SYSTEM RESET” confirmation mes-
sage appears, press the shutter button.
The display should return to normal after the system
reset is complete.
Problem with internal memory. Contact your dealer or an
authorized CASIO service provider.
Not enough memory for further recording. Change resolu-
tion or delete some images from memory (pages 34, 57).
No images are stored in memory.
Not enough memory for recording in current resolution
mode. Change to another resolution mode, change reso-
lution of stored images or delete some images from
memory (pages 34, 57).
Problem with internal memory. Contact your dealer or an
authorized CASIO service provider.
MEMORY ERROR
#2, #4
CONSULT THE
OWNER’S MANUAL!
MEMORY FULL
NO IMAGE
REMAINING
SYSTEM ERROR
CALL TECH
SUPPORT
SYSTEM RESET
YES
Ǟ
SHUTTER
NO
Ǟ
CALL
TECH SUPPORT
71
Exposure Range ................EV +6 to 17
Exposure Correction.........–2EV to +2EV (1/2EV units)
Shutter ................................CCD electronic shutter/mechanical
shutter
Shutter Speed ....................1/8 to 1/500 second
White Balance....................Automatic
Self-timer ............................10 seconds
Recording Modes ..............Single-image; Self-timer; Movie; Pan-
orama; Title; Macro
Flash Modes.......................AUTO, ON, OFF, Red-eye Reduction
Monitor/Viewfinder............1.8-inch TFT low-glare color LCD;
122,100 (555 x 220) pixels
Video Output......................NTSC/PAL (selectable)
Input/Output Terminals ....DIGITAL OUT, VIDEO OUT, AC adap-
tor connector
Power Supply.....................Four batteries (AA-size alkaline or
lithium batteries)/AC adaptor (AD-
C620)
Power Consumption .........Approximately 7.6 W
SPECIFICATIONS
Recording System.............Digital (JPEG base); PC Link software
can be used to input images in CAM,
JPEG, TIFF and other format.
Recording Medium............Flash memory (8MB)
Memory Capacity/
Computer Output image...SUPER FINE: 16 images
(450KB compressed – 1280 x 960 pixels)
FINE: 30 images
(225KB compressed – 1280 x 960 pixels)
NORMAL: 57 images
(113KB compressed – 1280 x 960 pixels)
ECONOMY: 88 images
(64KB compressed – 640 x 480 pixels)
The above figures are approximations
only. The actual number of images de-
pends on image subject matter.
Image Element ...................1/3-inch CCD (Total Pixels: 1,310,000;
Effective Pixels: 1,250,000)
Computer Output image...1280 x 960 / 640 x 480 pixels
Lens ....................................F2.8, f = 5.47mm
Focusing.............................Selectable between phase-difference
detection system autofocus and manual
focus
Aperture..............................Lens shutter/auto iris
Focus Range ......................NORMAL: 0.3m to ∞ (12" to ∞)
MACRO: 10cm (4")
(From surface of protective lens.)
Light Metering....................TTL center priority by CCD
Exposure Metering............Program AE
72
SPECIFICATIONS
Dimensions ........................131(W) x 69(H) x 43(D) mm /
5.1" (W) x 2.7" (H) x 1.7" (D)
Weight.................................Approximately 250g /
8.8oz. (excluding batteries)
Standard Accessories ...... wrist strap; soft case; video cable; four
LR6 alkaline batteries; owner’s manual
• The liquid crystal panel built into this camera is the product of pre-
cision engineering, with an effective pixel rate of 99.99%. This also
means, however that 0.01% of the pixels can be expected to fail to
light or to remain lit at all times.