Filter
Top Products
48
Snapshot Tutorial
NOTE
• The Self-timer cannot be used together with the following features.
High Speed CS with Prerecord CS, Prerecord (Movie), Slide Panorama,
Wide Shot, Triple Shot
• The Triple Self-timer cannot be used together with the following features.
Movie, Time Lapse, High Speed CS, Multi SR Zoom, HS Night Shot, HS Best
Selection, Blurred Background, All-In-Focus Macro
• The Handsfree Mode (page 64) can be used only while the Control Panel’s self-
timer setting is “Off”. For any other self-timer setting, the applicable self-timer
operation is performed.
You can adjust white balance to match the source of light available where you are
shooting and avoid the blue cast that results when shooting outdoors when it is
cloudy, and the green cast that results when shooting under fluorescent lighting.
1. In the REC mode, press [SET].
2. Use [8] and [2] to select the (White Balance) Control Panel option,
and then press [SET].
3. Use [8] and [2] to select the shooting condition you want and then
press [SET].
• You can also perform this operation using the function ring.
Adjusting White Balance (White Balance)
Setting
REC Screen
Icon Display
Description
Auto WB None
Configures the camera to adjust white balance
automatically.
Daylight For shooting outdoors on a clear day
Overcast
For shooting outdoors on an overcast rainy day,
in the shade, etc.
Shade
For shooting on a clear day in the shade of trees
or buildings
Day White
Fluor
For shooting under white or day white
fluorescent lighting
Daylight
Fluor
For shooting under daylight fluorescent lighting
‡
¤
'
“
†
–