Filter
Top Products
33D-Link DNR-322L User Manual
Section 3 - Conguration
Select this connection if you have a DHCP server
running on your network and would like a
dynamic IP address to be automatically updated
to your NVR.
You may obtain a static or xed IP address and
other network information from your network
administrator for your NVR. A static IP address
will simplify access to your NVR in the future.
The xed IP address.
The default value“255.255.255.0” is used to
determine if the destination is in the same
subnet.
The gateway forwards frames to destinations in
a dierent subnet. Invalid gateway settings may
cause the failure of transmissions to a dierent
subnet.
Primary domain name server that translates
names to IP addresses.
Secondary domain name server to backup the primary one.
Enable this setting if your ISP (DSL service) is using PPPoE. You may already have a Username and Password provided by your ISP,
or you may need to contact your ISP. The connection status will be determined automatically by the system.
Enable or disable the DHCP server. If your network doesn’t have DHCP server, enable NVR DHCP server for easier local network setup.
Network Setup
DHCP:
Static IP:
IP Address:
Subnet Mask:
Gateway IP
Address:
DNS1:
DNS2:
PPPoE
Settings:
DHCP server: