D-Link DNR-322L Security Camera User Manual


  Open as PDF
of 93
 
88D-Link DNR-322L User Manual
Appendix C - Technical Specications
+ Auto backup the video of previous day to FTP server
SYSTEM STATUS
+ Camera status, System status
+ Still picture EMAP support
NETWORK SERVICE PROTOCOLS
+ IPV4, ARP, TCP, UDP, ICMP
+ DHCP Client
+ NTP Client (D-Link)
+ DNS Client
+ DDNS Client (D-Link)
+ SMTP Client
+ HTTP Server
+ PPPoE
+ UPnP
+ IP ltering
USER INTERFACE
+ mydlink web portal - Internet Explorer v7 or later
+ HTTP Web browser - Internet Explorer v7 or later (32 bit OS only)
+ NVR Search Utility
Hardware Specication
STANDARDS
+ IEEE 802.3/u/z
+AutoMDI/MDI-X
+ SATA I, II.
HARD DISK
1
+ Hard Disk control & manage via PC
+ Reformat Disk
+ RAID 0
+ RAID 1
2
+ JBOD
TWO RESET MODES
+ResetrmwareGUIbutton
+ HW reset button (press over 5 seconds)
FLASH ROM
+ 128MB
RAM
+ 256MB DDR II
NIC
+GigabitEthernetLANport(10/100/1000Mbps)
I/O PORTS
+ RJ45 port x1
+ DC-in jack x1
+ USB port for UPS status update (optional)
POWER ADAPTER
+ DC12V/4A
RESET BUTTON
+ Reset to factory default
SECURITY
+ Device lock hole
POWER CONSUMPTION
+ Max. power consumption: 25.20W
+ Standby state max. power consumption:0.23W
DIMENSION WXDXH
+ 115 (W) x 146.4 (D) x 178.5 (H) mm (4.53 x 5.76 x 7.03 inches)
WEIGHT
+ 875.1 g (1.93 lbs)
OPERATING TEMPERATURE
+ Operating: 0˚ to 55˚ C (32˚ to 131˚ F)
+ Storage: -20˚ to 70˚ C (-4˚ to 158˚ F)
HUMIDITY
+ Operating: 5% to 90% (non-condensing)
 previous