D-Link DNR-322L Security Camera User Manual


  Open as PDF
of 93
 
84D-Link DNR-322L User Manual
Section 4 - Troubleshooting
Respond to a Critical RAID Volume
How the unit responds to a critical RAID Volume depends on the RAID level of your Volume and whether you have a spare
drive available:
For RAID 1 Volumes, if a spare drive is available, the RAID Volume will begin rebuilding itself automatically.
For RAID 1 Volumes, when no spare drive is available, you must replace the failed disk drive. The RAID Volume will begin rebuilding itself when you install the new disk drive.
RAID 0 Volumes go oine after a disk drive failure. A RAID 0 volume cannot be rebuilt. All data on the volume will be lost.
Restore the Default Administrator’s Password
Ifyouforgetthepassword,youcanresetthepasswordfor“admin”tothedefaultpassword:<empty>. Press and hold the reset
button for 5 seconds until the Power LED ashes three times. The Administrator password will now be blank.
Caution
When you reset or recover your unit, sometimes it will cause data corruption. Backup your recorded data before resetting your
unit.
Install ActiveX
IfyoucannotseethecompletepageofthesystemwhenusingInternetExplorer,theActiveXinstallationprocessmaynotbe
complete.
Step 1: Click the Live View/Playback button on the top right.
Step2:ThebrowserwillaskwhethertoinstallActiveX.
Step 3: Click the upper bar to begin the installation process.
Step 4: Click the Install button to complete the process.
Cannot Login to the Unit through Internet Explorer
1. Check the settings of your anti-virus software.
2. Adjust the settings of or disable anti-virus software.
 previous next