Filter
Top Products
50D-Link DNR-322L User Manual
Section 3 - Conguration
What is RAID?
RAID, short for Redundant Array of Independent Disks, is a combination of two or more disks with the aim of providing fault
tolerance and improving performance. There are several dierent levels of RAID, with each providing a dierent method of
sharing or distributing data amongst the drives. The NVR supports RAID levels 0 and 1.
RAID 0 RAID 0 provides data striping, which spreads out
blocks of data over both drives, but does not
provide data redundancy.
Although performance is improved, the lack of
fault tolerance means that if one drive fails, all data
in the array will be lost.
RAID 0
RAID 1 RAID 1 provides mirroring over both disks, with the
same read/write speed of a single disk. A RAID 1
array can only be as large as its smallest member
disk.
Because the data is stored on both disks,
RAID 1 provides fault tolerance and protection, in
addition to performance advantages.
RAID 1