Filter
Top Products
20 Getting Started
Resetting all settings to default values
If necessary, you can use this function to initialize all current settings
to their default settings as shown below.
Follow the steps below to reset the initial settings.
1. Select Initialize Settings in the Camera Settings menu using the JOG
dial, and press the ENTER button. The Initialize Settings screen is
displayed. For details on using the menu, see “Camera Settings
menu” on page 39.
2. Confirm that OK is highlighted, and press the ENTER button.
Camera Settings are initialized, and the screen returns to the
Camera Settings menu.
Releasing the Shutter
Full and half-release
The shutter-release button has the following two-step function.
Focus
To set focus on a subject such as a group of people, superimpose the
double images in the center of the viewfinder into one by rotating the
focusing grip of the lens.
Note:
When focusing the subject, place your eye at the center of the rangefinder
eyepiece.
More focusing
For accurate focusing of subjects with vertical lines, simply turn and
adjust the lens so that the lines join together.
Setting item Default setting
Color Color
Film Standard
Date YYYY/MM/DD
Power Save Timer 5 min.
Sequential Numbering On
LCD Brightness 5/8
Language English
USER Button Delete
Half-release: When you press the shutter-release button halfway
down, the optimal shutter speed (i.e., optimal
exposure value) is displayed in the viewfinder. Also,
pressing the shutter-release button halfway in the
playback mode or the Power Save Timer mode
returns to the shooting mode.
Full-release: Press the shutter-release button fully down to take a
photo.