Filter
Top Products
Viewing and Managing Your Photos 37
3
3
3
3
3
3
3
3
3
3
LCD Brightness Settings
Brightness of the LCD monitor can be selected from 8 grades (default
setting is 5).
1. Select LCD Brightness in the Basic Setup menu using the JOG dial,
and press the ENTER button.
2. Select the desired brightness using the JOG dial and press the
ENTER button.
The new setting is saved, and the screen returns to the Basic Setup
menu.
Setting Number of Prints (DPOF Setting)
When you want to print photos, you can specify the number of prints
and information to be included on each photo. This setting is saved in
a Digital Print Order Format (DPOF) file on the camera’s memory card.
You can apply these settings when using a printer or printing
application that supports the DPOF standard. Also, in some countries
you will find digital photo labs that support DPOF and can print
according to the settings in your DPOF file.
1. Press the MENU button in the playback mode. The Main menu is
displayed.
2. Select Print Order using the JOG dial, and press the ENTER button.
3. Select Set DPOF for one or Set DPOF for all using the JOG dial,
and press the ENTER button.
To specify the DPOF for the currently displayed image, select Set
DPOF for one.
To confirm the current DPOF setting, select View current DPOF.
Note:
When rotating the JOG dial in the lower position, you can display another
image to be set DPOF.
4. Specify the number of prints using the JOG dial and press the
ENTER button.
Note:
The number of prints cannot be specified for CCD-RAW data.