Filter
Top Products
Making Settings
4-21
R4C7850
Rev. C
A5 size MAKESET.FM
4/27/01 Pass 3
R
Proof Sign-off:
K. Pipa CRE Tsutagawa
K. Pipa
CRE R. Hopley
4
4. Press the BACK button to return to the previous
screen.
Adjusting the speaker volume
Follow these steps to adjust the volume of the built-in
speaker.
1. Set the dial switch to and turn on the camera.
2. Press the Camera SETUP button.
3. Press the Volume button to adjust the speaker
volume level.
4. Press BACK to return to the previous screen.
Setting the beep and shutter sound
You can choose to have the camera beep whenever
you press an LCD monitor button and make a shutter
sound whenever you take a picture, only make a
shutter sound when you take a picture, or never make
a sound. You can also set the camera to beep when
using the self timer if Beep is set to Always. Follow
these steps to change the sound setting.
Note:
To adjust the volume of the built-in speaker, see the previous
section.
1. Set the dial switch to and turn on the camera.
2. Press the Camera SETUP button.
3. Press the button below Beep to select Always,
Shutter, or Never. Then press the BACK button
to return to the previous screen.
Selecting the signal system and language
In order to view your photos and video
clips on a television, you need to choose
either the NTSC or PAL signal system to
meet your local television broadcasting standards.
You can also choose English, Japanese, French,
German, Italian, Portuguese, or Spanish (and Chinese
in some areas), as the language used to display camera
information on the LCD monitor.
To select the signal system and language, follow the
steps below.
1. Set the dial switch to and turn on the camera.
2. Press the button.