Filter
Top Products
EPTZ100_ma_en_rev03.doc 11
3 INSTALLATION
3.1 MECHANICAL
3.1.1 Ceiling mount
The ceiling mount accessories are included in the EPTZ 100 package.
1. Use the drilling template to mark the drilling holes.
2) Click the connector board into the ceiling adapter. Follow the red arrow marks at board and ceiling
adapter for correct position.
3) Mount the ceiling adapter and connector board to the ceiling. For the cables, use either the side outlet
or a hole in the ceiling.
4) Plug the dome module in the ceiling adapter. Make sure that the position of the camera module
connector fits the connector position of the connector board.
5) After plug-in, turn the camera module some degrees clockwise to latch the camera module.
6) Use the hex key to fix the camera position with the locking screw.
1
Connector
board
C ili d t
2
3
4
5
6