Filter
Top Products
EPTZ100_ma_en_rev03.doc 34
PATTERN A pattern is a programmed course of camera movement. EPTZ 100 can store 4
patterns with a maximum length of 10 minutes each.
1~4 Select a pattern for programming / checking.
RECORD Start the movement programming with "Go To
Preset 1". All manual movements / zoomings are
recorded now. The TIMER in the display counts
down the available time remaining in seconds.
PREVIEW Shows the programmed pattern. Any pan / tilt
command returns to PATTERN menu.
RUN Starts the selected pattern (this function will close
OSD menu).
DELETE Deletes the selected pattern.
RETURN Return to SCAN menu.
RETURN Return to MAIN menu.