Filter
Top Products
EPTZ100_ma_en_rev03.doc 36
4.1.9 Privacy Mask
EPTZ 100 allows for masking 4 different areas to protect private or confidential zones in the field of view.
MASK1~4 OFF/ON shows the status of the privacy zone:
ON: privacy zone masking active
OFF: privacy zone off
RIGHT enters the submenu to mask setup
POSITION
Definition of size and position of the privacy zone:
Step 1: the corner in the screen marks the upper left border of the privacy
zone:
Move the camera to the desired position and press IRIS OPEN (+) to
proceed.
Step 2: next screen shows the lower right border of the privacy zone:
Move the camera to the desired position and press IRIS CLOSE (-) to
proceed.
The defined mask will appear on the screen.
ENABLE
ON: privacy zone masking active
OFF: privacy zone off
RETURN Returns to privacy mask menu.
RETURN Returns to MAIN menu.
NOTE: If privacy masking is active, the pan / tilt speed of the dome is reduced for ensuring correct
processing of privacy masks.
IRIS CLOSE TO EXIT
IRIS OPEN:NEXT STEP