Filter
Top Products
– 14 –
&KHFNLQJ)RU2SHQ=RQHV
8VLQJWKH>∗@.H\
B
efore arming your system, all protected doors, windows and other protection zones
must be closed or bypassed, otherwise the keypad will display a "Not Ready" message.
Use the READY
key to display all faulted zones, making it easier for you to identify
and secure any open zone.
1. Press [
∗
] (do not enter code first) to display faulted
zones
.
2. Secure or bypass the zones displayed.
3.
The keypad’s READY indicator lights when all
protection zones have been either closed or bypassed.
4. Arm the system as desired.
Alpha Display:
∗
Fixed-Word Display:
Zone no. and “NOT READY”
Voice Status: Voice Keypads (if installed), can announce system status and faulted
zones (up to 3 zone descriptors) if the Voice Status feature is turned on.
To turn the Voice Status feature on/off:
# + 0 + 2 + 4
(also turns on Voice Chime mode; see
Chime mode
section)
To announce Status: Press [#] FUNCTION + [0] VOICE + [
∗
] STATUS key.
(Announces current system status; e.g., “Disarmed Ready to
Arm.”)
To announce faults: Press [#] FUNCTION + [0] VOICE + [
∗
] STATUS + [
∗
] again
within 5 seconds of the first press. (Announces up to three
faulted zones with their zone descriptors, if programmed.)