First Alert K5309-5V2 Security Camera User Manual


 
29
3DJLQJ)HDWXUH
0DQXDO3DJLQJ
Your system may be set up so you can manually send a message to up to four
(FA168CPS) or two (FA148CP) pagers.
Your installer programs the paging function key and the pager phone numbers.
Pressing the paging keys sends the message
9999999
to the selected pager
.
This message could mean call home, call your office, or any other prearranged
meaning.
See the Paging chart at the back of this manual for details of the paging setup for
your system.
1. Hold
pager key
2 seconds then press pager no. (1-4).
Press and hold the programmed Paging Key for at
least 2 seconds (wait for beep), then press the pager
number* representing the pager intended to receive
the message.
2. The recipient, on seeing the 9999999 message, will
understand the prearranged meaning of this signal.
*
If no number is pressed, the message is sent to pager 1
.
Alpha Display:
Fixed-Word Display:
READY
Pager Display
/DWFK.H\3DJLQJ
You can program a schedule that causes a pager report to be sent if the system is not
DISARMED by the scheduled time (see Scheduling section, event 03). For example,
a working parent might want a message to be sent to a pager if their child did not
arrive home from school and disarm the system by a certain time.
If programmed, the message that is sent is:
7777777
.