– 23 –
'DWHDQG7LPH
9LHZLQJWKH&XUUHQW'DWHDQG7LPH
The system lets you view its time and date setting on alpha keypad.
+[#] + [6] [3]
(Security Code)
OR, press the function key (A, B, C, or D) for viewing
current date and time, if programmed.
Alpha Display:
A typical time/date display is shown.
The display will remain on for about 30 seconds.
“A” “B” “C” “D”
If one of the above keys has been programmed for the date/time
display feature, place a check mark in the box beneath that key.
6HWWLQJWKH'DWHDQG7LPH
You can set the time and date by doing the following:
1.
+[#] + [6] [3]
(Security Code)
Alpha Display:
2. Press [
∗
] when the time/date is displayed.
A cursor appears under the first digit of the hour.
To move cursor ahead, press [
∗
]. To go back, press [#].
•
Enter the 2-digit hour setting.
•
Enter the 2-digit minute setting.
•
Press [1] for PM or [0] for AM.
•
Enter the last two digits of the current year.
•
Enter the 2-digit month setting.
•
Enter the 2-digit day setting.
3. To exit, press [
∗
] when cursor is at the last digit, or
wait 10 seconds.
Current time display
Time/date editing display