Filter
Top Products
ix
For Your Safety
Q This product, which contains encryption
function developed in the United States,
is controlled by the United States Export
Administration Regulations and may not
be exported or re-exported to any coun-
try to which the United States embargoes
goods.
• Use only as part of a wireless network. FUJI-
FILM does not accept liability for damages
resulting from unauthorized use. Do not
use in applications requiring a high degree
of reliability, for example in medical de-
vices or other systems that may directly or
indirectly impact human life. When using
the device in computer and other systems
that demand a greater degree of reliability
than wireless networks, be sure to take all
necessary precautions to ensure safety and
prevent malfunction.
• Use only in the country in which the device was
purchased. This device conforms to regula-
tions governing wireless network devices
in the country in which it was purchased.
Observe all location regulations when us-
ing the device. FUJIFILM does not accept
liability for problems arising from use in
other jurisdictions.
• Wireless data (images) may be intercepted by
third parties. The security of data transmit-
ted over wireless networks is not guaran-
teed.
• Do not use the device in locations subject to
magnetic elds, static electricity, or radio
interference. Do not use the transmitter in
the vicinity of microwave ovens or in other
locations subject to magnetic fi elds, static
electricity, or radio interference that may
prevent reception of wireless signals. Mu-
tual interference may occur when the trans-
mitter is used in the vicinity of other wire-
less devices operating in the 2.4GHz band.
• The wireless transmitter operates in the 2.4GHz
band using DSSS and OFDM modulation.
Wireless Network Devices: Cautions
• This device operates on the same frequency as
commercial, educational, and medical devices
and wireless transmitters. It also operates
on the same frequency as licensed trans-
mitters and special unlicensed low-voltage
transmitters used in RFID tracking systems
for assembly lines and in other similar ap-
plications.
• To prevent interference with the above devices,
observe the following precautions. Confi rm
that the RFID transmitter is not in opera-
tion before using this device. Should you
observe that the device causes interference
in licensed transmitters used for RFID track-
ing, immediately choose a new operating
frequency for this device to prevent addi-
tional interference. If you notice that this
device causes interference in low-voltage
RFID tracing systems, contact a FUJIFILM
representative.
2.4DS/OF4
This sticker indicates that
this device operates in
the 2.4 GHz band using
DSSS and OFDM modula-
tion and may cause inter-
ference at distances of up
to 40m.