Filter
Top Products
20 21
Using
the Camera
0FinePix Photo mode ( ) button
Photography: Allows you to select the quality
(Number of recorded pixels),
sensitivity and FinePix COLOR
settings.
Playback: Allows you to specify the print order
(DPOF) settings.
0Diopter adjustment dial
Makes the image in the viewfinder easier
to see. Set the dial to the position where
the AF frame appears sharpest.
0AE-L button
The exposure remains locked while this
button is pressed.
0Focus check button
Pressing this button enlarges the central portion
of the screen. Use this to focus the image precisely.
Text displayed
Framing guideline displayed
No text displayed
Text displayed
No text displayed
Multi-frame playback
0DISP button Changes the screen display.
Photography
mode
Playback
mode
0FZ ring
Adjusts the focus. When the Focusing mode
is set to S-AF or C-AF, the focusing ring
can be used instead of the Zoom button.
0INFO button
Press this button to view image information.
Photography mode: Shows the current settings
(sensitivity, sharpness, etc.) and the
histogram.
Playback mode: Displays the information for the image
currently displayed.
0One-touch AF button
Uses the AF function to focus the image once.
This can only be used for manual focusing.
0Focus mode selcector switch
Switches between C-AF (Continuous AF), S-AF
(Single AF) and MF (Manual focus).
0Macro button
Use this for close-up photography. Pressing this button changes the modes as follows:
Macro Super Macro Macro off (Normal)
Focal range: Macro 10 cm-80 cm (3.9 in.-2.6 ft.)
Super macro 1 cm-20 cm (0.4 in.-7.9 in.)
Normal 50 cm (1.6 ft.) to infinity (wide-angle), 90 cm (3.0 ft.) to infinity
(telephoto)
0SHIFT button
Can be used in combination
with other buttons to change
settings (➡P.22).
Up, down, left and right are indicated
by black triangles in the Owner’s
Manual. Up or down is shown as
“a” or “b”, and left or right is shown
as “d” or “c”.
: Exposure compensation
Hold down the “ ” button and turn the
Command dial to select the setting.
: Flash
Release the pop-up flash, hold down the “ ”
button and turn the Command dial to select
the setting.
: Continuous shooting
Hold down the “ ” button and turn the
Command dial to select the setting.
0Command dial
In Photography mode, Turn the Command dial to
select program shift and specify settings such as
the shutter speed and aperture.
0Using the menus
2Select a menu option.
Press the left or right arrow on
the 4-direction button.
3Select a setting.
Press the up or down arrow
on the 4-direction button.
1Display the menu.
Press the “MENU/OK” button.
4Confirm the setting.
Press the “MENU/OK”
button.
0BACK button
Press this button
when you want to
cancel a procedure
mid-way.
BASIC OPERATION GUIDE