Filter
Top Products
86 87
Settings
ADAPTER SETTING
YES: Select this setting when using a conversion
lens. Selecting this setting, the “¡” icon
appears.
NO : Select this setting when not using a
conversion lens.
●
!
Selecting the wrong setting could prevent the camera from
focusing successfully.
◆
Overview of the conversion lens/adapter ring
◆
Wide conversion lens WL-FX9/WL-FX9B
This is a set that includes a wide conversion lens and adapter ring and converts the camera’s focal
length by 0.79 times (equal to a 28 mm wide-angle lens). This set also allows you to use commercially
available filters.
h Wide conversion lens specifications
Magnification : 0.79×
Lens configuration: 3 lenses in 3 groups
Dimensions : 70 mm (2.76 in.) dia. × 32 mm (1.26 in.)
Mass (Weight) : Approx. 185 g (6.5 oz.)
Accessories : Adapter Ring AR-FX9 (see below for specifications), Lens caps (front and rear),
Lens pouch
●
!
This lens should be used at the wide-angle zoom setting (equivalent to 28 mm-46 mm). Using the lens at the
telephoto setting increases the amount of distortion.
●
!
The wide conversion lens and built-in flash cannot be used together.
Teleconversion lens TL-FX9/TL-FX9B
This is a set that includes a teleconversion lens and adapter ring. This accessory increases the focal
length of your lens by 1.5 times (equal to a 315 mm telephoto lens) without changing its F-stop value.
h Teleconversion lens specifications
Magnification : 1.5×
Lens configuration: 3 lenses in 3 groups
Dimensions : 65 mm (2.56 in.) dia. × 55 mm (2.17 in.)
Mass (Weight) : Approx. 100 g (3.5 oz.)
Accessories : Adapter Ring AR-FX9 (see below for specifications), Lens caps (front and rear),
Lens pouch
●
!
The TL-FX9/TL-FX9B should only be used for telephoto shots where eclipsing does not occur. Eclipsing occurs at
wide-angle settings.
●
!
The built-in flash cannot be used with the teleconversion lens.
The adapter ring is required for using commercially available filters.
h Adapter ring specifications
Compatible filters : 55 mm-diameter commercial available filters
Dimensions : 58 mm (2.28 in.) dia. × 39 mm (1.54 in.)
Mass (Weight) : Approx. 30 g (1.1 oz.)
●
!
Do not use more than one filter at a time.
Conversion
Lens
Adapter Ring
Adapter Ring
Filter
Mount the Adapter Ring, Conversion
Lens and commercially available
filters by screwing them on in the
direction of the arrow.
SET-UP
When this function is enabled, the screen
temporarily turns off (Sleep mode) (the indicator
lamp (green) blinks at 1-second intervals) to save
power if the camera is not used for approx. 30
seconds. If the camera remains unused for an
additional interval (2 minutes or 5 minutes), it is
automatically turned off. Use this function when you
want to get the maximum possible running time from
your batteries.
●
!
The Power save setting is disabled during automatic
playback, during rechargeable battery discharging and when
a USB connection is being used.
When the camera is in Sleep mode, pressing the
Shutter button down halfway wakes the camera up
so that it is ready to take pictures. This is useful
since the camera can be ready to take pictures
almost instantly.
●
!
Pressing any other button as well as the Shutter button
wakes the camera up.
POWER SAVE SETTING
(
low power setting
)
◆
To restore power to the camera
◆
When the Auto power off function has shut the
camera down (after 2 minutes or 5 minutes):
1 Set the Power switch to “OFF”.
2 Set the Power switch back to “
q” or “w”.
01 02
FORMAT
(
media initialization
)
Initialize (format) the media for use with the camera.
Because initializing the media erases all the files,
including protected files, Copy important frames
(files) that you do not want to be erased to your
computer or another media.
1Press “d” or “c” to select “OK”.
2Pressing the “MENU/OK” button erases all the
files and initializes the media.
●
!
Always check the media to be formatted on the screen before
proceeding.
h Formatted media
¨: xD-Picture Cards
ˆ: Microdrives
●
!
If the “å” “˚” “ƒ” or
“
©” message appears, refer to P.111
before formatting the media and take the appropriate
measures.
01 02
The Sleep function does not operate in SET-UP or Playback mode, but the camera will
automatically turn off if it is left unused for a set some time (2 or 5 minutes).