Filter
Top Products
83
Settings
82
W
USING THE SET-UP SCREEN
1
1Set Power switch to “q”.
2Set the Mode dial to “W” to display the SET-UP
menu.
●
!
Always turn the camera off when replacing the batteries.
Opening the battery cover or disconnecting the AC power
adapter without turning the camera off, the camera settings
may revert to the factory default values set at shipment.
01 02
1
1Set the Power switch to “w”.
2Press the Photo mode (p) button.
01 02
2
1Press “d” or “c” to select “U” DPOF ALL RESET.
2Press the “MENU/OK” button.
3
A confirmation message appears.
To reset all the DPOF settings, press the “MENU/OK”
button (Photo mode (p) button).
01 02
U DPOF ALL RESET
pPHOTO MODE PLAYBACK
SET-UP
4 Settings
■ SET-UP menu options
IMAGE DISP. ON/OFF/PREVIEW ON
Use this option to specify whether the Preview images (the
photographed image) is displayed after taking a shot. See P.84
for details.
POWER SAVE 2 MIN/5MIN/OFF 2 MIN
Use this option to specify whether the camera’s power
consumption is reduced and the camera is subsequently turned
off automatically when it is not being used. See P.86 for details.
FORMAT OK – Erases all files. See P.86 for details.
§ BEEP
OFF/1/2/3 2
Sets the volume of the tone emitted when the camera controls
are used.
§ SHUTTER
OFF/1/2/3 2 Sets the volume of the sound emitted when the shutter operates.
DATE/TIME SET – Use this option to correct the date or time. See P.16 for details.
ADAPTER YES/NO NO
Select this setting when a conversion lens is used. See P.87 for
details.
MEDIA
º(xD-Picture Card)
ª (Microdrive)
º
Sets the media to be used when an xD-Picture Card and
Microdrive are loaded in the camera.
FRAME NO. CONT./RENEW CONT.
Specifies whether frame numbers are assigned consecutively
from previous numbers or begin again. See P.88 for details.
USB MODE
ºª¶/qPC
ºª¶
Selects the function when the camera is connected to a PC.
See P.99 for details.
DISCHARGE OK – Discharges Ni-MH batteries. See P.109 for details.
CCD-RAW OFF/ON OFF
Sets the image quality to CCD-RAW. Because no image
processing is performed on the camera for CCD-RAW images,
they must be processed on a computer.
ENGLISH
Use this setting to specify the language used for screen display.
VIDEO SYSTEM NTSC/PAL – Specifies whether video output is set to NTSC or PAL.
qRESET
OK –
Resets all the camera settings (other than the DATE/TIME,
LANG. and VIDEO SYSTEM) to the factory default values set at
shipment. A confirmation message appears when you press “c”.
To reset the camera settings, press the “MENU/OK” button again.
Settings Display
Factory default
Explanation
Continued