Filter
Top Products
71
Advanced Features — Playback
CAUTION
• Make sure the receiving camera is turned on when
transmitting image data.
• If the image is 3:2 ratio, white lines may appear at the
top and bottom or right and left of the print, depending
on the printer type.
• Movie images cannot be transmitted.
• Images photographed with a camera other than FinePix
Z10fd may not be printed or transmitted.
CHECK
Refer to the manual provided with the receiving device for
more information.
Receiving the image data from a FUJIFILM digital camera is
shown as an example here. You can receive data from
another device in the same way.
CPoint the infrared port on the transmitting camera
directly at the infrared port on the receiving camera
(➝p.11). Transmission distance is about 5 to 20 cm (2
to 7.9 in.) within approx. 15°.
DPress MENU/OK to begin transmission.
When transmission is completed,
[TRANSMISSION COMPLETED] will appear
on the LCD monitor.
(Angle: up to approx.15°)
IR COMMUNICATION
CANCEL
CONNECTING
Receiving the image data
ATurn the camera on.
BPress p or q to select the sending frame
(file).
IR COMMUNICATION
CANCEL
TRANSMIT RECEIVE
(Angle: up to approx.15°)
Continued Q