Filter
Top Products
17
1
◆
Power Save Function
◆
If the camera is not used for 2 minutes, this
function automatically switches it off.
When this function is enabled, the LCD monitor
switches off to conserve battery power if the
camera is not used in any way for 30 seconds
(See P.66 for details).
◆
Checking the remaining battery charge
◆
Switch the camera on and check that no battery
level warning (
Z or X) is displayed on the
LCD monitor. If no icon is displayed, there is
ample charge left in the battery.
i
Z Lit red:
Battery charge low. Replace or recharge the
battery as it will run out shortly.
i
X Blinking red:
The battery is exhausted. The display will shortly
go blank and the camera will stop working.
Replace or recharge the battery.
●
!
The above estimates are for the Still photography
modes. In Playback mode, the transition from
“
Z” to “X” may take less time.
Displays the date in the “month/day/
year” format.
MM/DD/YYYY
Displays the date in the “day.month.
year” format.
DD.MM.YYYY
YYYY.MM.DD
Explanation
Setting
Displays the date in the “year.month.
day” format.