Filter
Top Products
22
3
Use the LCD monitor or viewfinder to locate your
subject in the frame.
●
!
To frame your shot precisely, you should take the
picture using the LCD monitor.
●
!
In some conditions it may be difficult to see your subject
clearly on the LCD monitor. (Such as in sunny weather
outdoors or when you are shooting dimly lit scenes.) In
such situations, use the viewfinder to take the shot.
4
LCD monitor
Viewfinder
TAKING PICTURES
(
A AUTO MODE
)
Q
MODE
Take care to hold the camera so that your
fingers or the strap do not cover the lens, flash
or flash control sensor. If the lens, flash or flash
control sensor is obscured by your fingers or the
camera strap, you may not be able to obtain the
correct brightness (exposure) for your shot.
●
!
There may be some unevenness in the brightness at
the lower edge of the LCD monitor. This is normal
and does not indicate a fault. This does not affect
the photographed image.
●
!
Check that the lens is clean. If it is dirty, clean the
lens as described on P.100.
●
!
If you use the flash in very dusty conditions or when
it is snowing, white dots may appear in the image
due to the flash reflecting off the dust particles or
snowflakes. Try taking the shot with the flash
switched off.