FujiFilm S3000 Digital Camera User Manual


 
39
2
MULTI-FRAME PLAYBACK
w
PLAYBACK
Text displayed
No text displayed
Multi-frame playback
1 2
01 02
!
The screen text display disappears after approximately
3 seconds.
!
Playback zoom cannot be used with multi-frame
playback.
In playback mode, the display shown on the
screen switches each time you press the “DISP”
button. Press the “DISP” button until the multi-
frame playback screen (9 frames) appears.
1Select a frame by using “d”, “c”, “a” and “b
to move the cursor (the orange box) to the
desired frame. Press “a” or “b” several times
to switch to the previous page or the next
page.
2You can enlarge the selected image by
pressing the “DISP” button again.
38
VIEWING YOUR IMAGES
(
PLAYBACK
)
w
PLAYBACK
During playback, you can skip backwards or
forwards through the images (the frame number
increases or decreases) by holding down “d” or
c” for approximately 1 second.
The displayed image does not change, but a
progress bar indicates the approximate playback
location on the xD-Picture Card.
1Set the Power switch to “
w”.
2Use the “d” and “c” to move forward and
backward respectively through your images.
!
When you set the Power switch to “w”, the last
image shot is displayed.
!
You can use this camera to play back still images
recorded on an FinePix S3000 or still images
(excluding some uncompressed images) recorded on
any FUJIFILM digital camera that supports xD-Picture
Cards.
Playback frame number
01 02
Fast Forwarding Images