Open as PDF
The ISO function allows you to set the camera sensor
sensitivity to light. To improve the performance in
darker environments, a higher ISO value is required.
On the other hand, a lower ISO value is needed when in
(The ISO setting is only available when the camera is in
the Manual mode).
To set the ISO value, do the following:
1. Press the
button to enter the Function menu.
2. Use the
Left/Right navigation buttons to highlight
the ISO function.
Higher ISO pictures will naturally have more
noise than lower ISO pictures.
3. Use the Up/Down navigation buttons to select the
desired ISO value from Auto, 64, 80,100, 200, 400,
800, or 1600.
4. Press the
button to conrm your setting.
5. Use the Left/Right buttons to select other options,
or press the button once to conrm your selec-
tion and exit the current menu.