Filter
Top Products
16
H4D
Typical camera grip display when changing set-
tings.
Command indication
The upper row on the screens describes commands (which
change according to the setting). The button immediately above
each command eects the change. So in this case, for example,
you would press the FLASH button to ‘exit’ from the screen.
See note below.
Settings symbols
Symbolize the options available when settings are changed.
The active symbol is depicted by a drop shadow.
Control wheel description and direction
Arrowheads symbolize which control wheel should be used to
change the setting they are beside. In this case, the Bracketing
option is chosen by the front control wheel and the number of
captures in that option is chosen by the rear control wheel.
. . .
= front control wheel
= rear control wheel
Setting information
The lower row on the screen displays information about the
current state of the setting. In short, the upper row displays
what you can do, and the lower row displays the current state of
settings or what you have done.
Typical camera grip display.
Grip display − overview
Focus setting
(Autofocus setting,
single shot mode)
Drive condition
(Single setting)
Shutter speed setting
(1/400s)
ISO setting
(100 ISO)
Low battery symbol
Capture counter
(28 shots remaining on chosen
storage medium)
Metering method
indication
(Centre weighted)
White balance
(Daylight)
Flash condition indication
(No exposure compensation,
normal ash synchronisation)
Aperture setting
(f/5.6)
Exposure mode indication
(Aperture priority setting)
Exposure Value display
(EV 13.8)