Hasselblad 70380554 Digital Camera User Manual


  Open as PDF
of 140
 
78
H4D
Browsing by approval status
You can set the camera to browse by approval status, which
means, for example, that you will see only green-status images as
you browse a batch (or both green and yellow, or only red, etc.).
The current lter setting is indicated on-screen, as illustrated.
Filtered images are still there, but they will not be shown until
you change the lter setting. Also, if you change the status of an
image, the image may ‘disappear’ if it no longer passes the lter.
For example, if you have set the camera to browse only green-
status images and then change an image to yellow status, that
image will not be shown again until you change the browse lter.
You have the following choices:
• All: browses all of the images in the current batch, regardless of
their approval status. This is the default.
• Red: browses only red-status images from the current batch. These
are images that you have marked for likely deletion. You might
browse these images to make sure you have not eliminated any
usable images and/or to find images that you can delete to make
room for new shots.
• Green: browses only green-status images from the current batch.
These are either new shots that did not trigger an exposure warning
or shots that you manually assigned to green after overriding an
exposure warning.
• Green & Yellow: browses green and yellow-status images, but
does not show red-status images. These are probably images that
you have either decided to keep or not yet checked for approval
status.
There are many ways to make use of this feature. For example:
• Settheltertoshowonlyyellowimages.Thenstepthrough
each image and decide whether any of them should be
promoted to green or demoted red.
• Ifyouarerunningoutofspace,settheltertoshowonlyred
imagesandthenstepthroughtondshotsyoucandelete.
• Settheltertoshowonlygreenimages.Thenstepthrough
tomakesureyouhaveatleastonegoodexampleofeach
shot that you need.
There are two ways to set the browse lter:
1. Choose
MAIN MENU > Browse
. The current setting is displayed
here.
2. Use the zoom (
–
or
+
) button to step through the lter
options (described above) until you have selected the lter
you wish to use.
3. Press the menu button to exit the menu system and keep the
setting.
The appearance of the ‘Empty Browse Filter’ message signies
that there are no images with that particular approval status.
Showall
(brackets on all)
Showgreenandyellowonly
(brackets on green and yellow)
Showgreenonly
(brackets on green only)
Showyellowonly
(brackets on yellow only)
Showredonly
(brackets on red only)
Press and hold (do not click!) the Instant Approval button until the
approval status colour appears. Browsing will then only display the
images with that classification.
Browseltershortcut
1
2 3
 previous next