Hasselblad 70380554 Digital Camera User Manual


 
96
H4D
SettingCAMERAmodelandoptions
These settings are only available when the sensor unit is not
attached to an H4D body.
Proceed as follows:
1. Press the menu (
MENU
) button to open the menu.
2. Use and to select the
SETTINGS
sub-menu.
3. Press to open the
SETTINGS
menu.
4. Use and to select
CAMERA
.
5. Press to open the
CAMERA
menu.
6. Press either the
+
or
button to select camera model.
7. Use and to select
EXPOSURE TIME
or
CAPTURE SEQ.
if required
.
8. Press either the
+
or
button to make new settings
if required.
9. Press the menu (
EXIT
) button to exit the menu system and
keep the settings.
OptionsavailableforPINHOLEandFLASHSYNC
Shutter Delay
The normal setting is Default and cannot be changed.
Exposure Time
This setting should be changed for cable-free exposure times
longer than 1/8 second, ensuring that it matches the shutter
speed/exposure time on the camera/lens. The settings range
from 1/8 second to 32 seconds (1/8 second is the default setting).
Capture Sequence
This feature functions in the same manner as an interval timer.
Initial delay: Controls the amount of time required to elapse
before the rst capture.
Delay: Controls the amount of time required between each
capture.
Count: Controls the total number of captures required.
8
1 2
3 4
65
7
9