Filter
Top Products
120
HP Photosmart M22/M23 User’s Manual
My image is
blurry
(continued).
The camera
should have
been set to the
Macro
shooting mode.
Set the camera to the Macro
, shooting mode and try
taking the picture again (see
page 42).
The subject
moved or you
moved the
camera while
you took the
picture.
• Set the flash to Auto Flash
or Flash On and set
the shooting mode to Action
.
• Hold the camera with two
hands as you press the
Shutter button or use a
tripod. Watch for the
icon in the Image Display
(this means that it is almost
impossible to hold the
camera steady, and you
must use a tripod).
The camera
focused on the
wrong thing, or
was unable to
focus.
• Make sure the focus
brackets turn green before
taking the picture (see
page 36).
• Use Focus Lock (see
page 38).
My image is
too bright.
The flash
provided too
much light.
• Use Image Advice (see
page 72).
• Turn the flash off (see
page 40).
• Move back from the subject.
You used EV
Compensation
when you
should not have.
Set EV Compensation to 0.0
(see
page 56).
Problem Possible Cause Solution