HP (Hewlett-Packard) M22 Digital Camera User Manual


 
122
HP Photosmart M22/M23 User’s Manual
My image is
too dark
(continued).
There was not
enough light.
Use Image Advice (see
page 72).
Wait for natural lighting
conditions to improve.
Add indirect lighting.
Use the flash (see
page 40). This is called
fill-flash.
Increase the EV
Compensation (see
page 56).
Use Adaptive Lighting (see
page 52).
A light is behind
the subject.
Use the Flash On
setting
(see
page 40) to brighten
the subject.
Increase the EV
Compensation (see
page 56).
Use Adaptive Lighting (see
page 52).
Your finger
blocked the
flash.
Be sure to move your fingers
away from the flash when you
take a picture.
The Display
Brightness
needs to be
adjusted.
Set the Display Brightness in
the Setup Menu to Medium or
High (see page 94).
My image is
grainy.
The ISO Speed
setting was too
high.
Use Image Advice (see
page 72).
Use a lower ISO Speed
setting (see page 59).
Problem Possible Cause Solution