Filter
Top Products
55
Taking Pictures and Recording Video Clips
After you have taken a picture using either the Date Only or
Date & Time setting, the date or date and time that is
imprinted on the image cannot be removed later.
TIP: Verify that the date and time setting is correct before
using this feature (see Date & Time on page 96).
1. In the Capture Menu (page 48),
select Date & Time Imprint.
2. In the Date & Time Imprint sub-
menu, use the buttons to
highlight a setting.
3. Press the button to save the
setting and return to the Capture
Menu.
The following table explains the settings in more detail:
If the new setting is anything other than the default Off
setting, the icon for the setting will appear in the Live View
screen. The new setting remains in effect until it is changed
again, even when you turn the camera off.
NOTE: The Date and Time setting does not apply when
recording video clips nor in Panorama mode.
Setting Description
Off The camera will not imprint a date or date & time
on the image.
Date Only
The camera will permanently imprint the date in the
lower left-hand corner of the image.
Date & Time
The camera will permanently imprint the date and
time in the lower left-hand corner of the image.