Filter
Top Products
50 HP Photosmart R707 User’s Manual
Your camera came with the ArcSoft® Panorama Maker™
software that automatically stitches the images in the
panoramic sequence together on your computer during image
transfer. The Panorama Maker software was automatically
installed on your computer during the HP Image Zone software
installation process (see Installing the Software on page 19).
To transfer the panoramic sequence of images from your
camera to your computer so that the ArcSoft Panorama Maker
software can stitch the images together, see Transferring
Images to a Computer on page 109.
Taking a Panoramic Sequence of Pictures
1 Press the Mode button on top of
the camera until the Panorama
mode appears in the Image
Display. The camera switches to
Live View with
displayed in
the Image Display. You are now
ready to take the first picture in
your panoramic sequence.
NOTE Panorama images are stitched together from left to
right, so your first image must be at the left-most end of
the panorama view.
2 Press the Shutter button to take the
first picture in the panoramic
sequence. After Instant Review, the
camera switches to Live View with
displayed in the Image
Display.