HP (Hewlett-Packard) R830/R840 Digital Camera User Manual


 
8 Using the Camera Setup Menu
The Camera Setup Menu allows you to set preferences for the camera’s behavior.
The
Camera Setup Menu is available from the Picture Capture, Video
Record, and
Playback menus.
1. While in the
Picture Capture, Video Record, or Playback menu, use
to highlight Camera Setup..., then press .
2.
Use
to highlight a menu option, then press to display the menu option’s
menu.
3.
Use
to highlight a setting, then press .
4.
To exit the
Camera Setup Menu, press repeatedly until you return to Picture
Capture,
Video Record, or Playback.
Settings you specify remain until you change them.
Display Brightness—Adjusts the brightness of the Image Display.
Automatic (R840 series only. Default)—For automatic adjustment of Image
Display brightness based on lighting conditions.
Low—For extending battery life.
Medium (Default for R830 series)—For normal viewing conditions.
High—For very bright lighting conditions.
Camera Sounds—Adjusts the speaker volume for camera sounds (such as button
presses and shutter clicks) and audio recorded with video clips.
Off, Low (Default), High.
Display Timeout—Specifies the time after which the Image Display turns off if you do
not press a button.
Never, 15, 30, 45 (Default), 60 seconds.
Digital Zoom—Enables or disables digital zoom.
On (Default), Off.
Date & Time—Sets the date and time. See Set the date and time” on page 7.
USB Configuration—Specifies how a computer recognizes the camera. See
Connecting to the computer” on page 32.
Digital Camera (Default)——Recognizes the camera as a digital camera using
PTP (Picture Transfer Protocol).
Disk Drive—Recognizes the camera as a disk drive using MSDC (Mass Storage
Device Class).
TV Configuration—Sets the video signal format for displaying camera images on a
TV.
NTSC—Used primarily in North America, parts of South America, Japan, Korea,
and Taiwan.
PAL—Used primarily in Europe, Uruguay, Paraguay, Argentina, and parts of Asia.
(Language)—Sets the language. See “Choose the language”
on page 7.
38 Using the Camera Setup Menu