Filter
Top Products
English
32
1<>2/3
Initial Settings
Press the MENU button, and then use f/e/d/c/A to display the “Initial Setup” menu
screen. See page 48 for detailed operation procedure. Press the MENU button again to exit setting.
SWITCHING OPERATING SOUND ON OR OFF (BEEP)
Select “On” or “Off”, and
then press the A button.
On: Beep will be heard
when the power
switch is changed
over, the REC button is pressed in the Video
mode, the SLEEP/START or EJECT button
is pressed, etc.
Off: No beep is heard.
Note:
The “Beep” setting will be stored in memory even when
the DVD video camera/recorder is turned off.
TURNING DVD VIDEO CAMERA/RECORDER OFF AUTOMATICALLY
(POWER SAVE)
Select “On” or “Off”, and
then press the A button.
On: To engage power
save. If the DVD
video camera/
recorder is left in the recording pause status
without being operated for 5 minutes, it
will automatically turn off to prevent the
battery from discharging needlessly.
Off: To cancel power save.
Note:
• To turn the DVD video camera/recorder on again from
automatic off activated by the power save function,
set the power switch to “OFF”, and then set it to “O”,
“N” or “P”.
• The Power Save setting will not appear in the on-
screen information display.
• If the sleep/start standby status continues for 30
minutes, the DVD video camera/recorder will
automatically turn off regardless of the Power Save
setting.
CHANGING DISPLAY LANGUAGE (LANGUAGE)
You can change the language used to display the menu and information.
The following shows that English is changed to French.
1 Press A or c with
the screen shown on the
right displayed: The
“Language” screen will
appear.
2 Choose “Français”, and
then press A.
The display will change
to French.
Note:
The language setting will be stored in memory even
when the DVD video camera/recorder is turned off.
Power Save
Beep
ENTER RETURN
Demo Mode
Reset
Language
Record LED
Initial Setup
On
Off
Power Save
Beep
Record LED
ENTER RETURN
Demo Mode
Reset
Language
Initial Setup
On
Off
Language
Eng l i sh
Auto
ENTER RETURN
Off
On
On
Power Save
Beep
Demo Mode
Reset
Record LED
Initial Setup
Français
Deutsch
Español
Italiano
Eng l i sh
ENTER RETURN
Language