Hitachi VM-H825LA Camcorder User Manual


 
Getting Started - 15 -
3. Fully insert the battery holder into the camcorder.
Remote Control Battery
1. Push the tab to the right of the remote control and hold it, then remove the battery holder.
2. Press the PLAY button and hold it for about two seconds.
3. Insert the battery with the "+" terminal facing up as shown in the figure.
4. Replace the battery holder with battery in the remote control making sure that it is fully inserted.
WARNING: KEEP THE BATTERIES AWAY FROM CHILDREN AND PETS.
IF SWALLOWED CONSULT A PHYSICIAN IMMEDIATELY FOR EMERGENCY TREATMENT.
Note: Replace the batteries with 3V micro lithium cells such as Maxell CR2025 or its equivalent.
Note: Dispose of battery safely in accordance with local laws. Do not dispose of in fire.
Note: Do not short circuit the batteries.
Note: Do not take apart the batteries.
Note: Do not hold the batteries with the metallic tweezers.
Note: Do not re-charge the batteries.
Note: Keep the batteries in a dark, cool, dry place.
Camcorder Batteries Using Battery Pack
Before you install the battery for the first time it must be fully charged. Refer to "Charging the Battery" on page 12
for details.
1. Lift the OPEN lever and pull it up. The power supply attachment cover will open.