Filter
Top Products
Advanced Techniques - 32 -
Note: Use the AV optical receiver and its AC power adapter indoors.
Note: The picture and sound may be interrupted or noise may occur when the AV optical receiver is exposed
to direct sunlight or strong artificial light from a fluorescent light, etc. or when infrared light from a TV or other
electrical appliance's remote control strikes the receiver. In this case, change the installation position of the
AV optical receiver.
Note: If the signal from the camcorder strikes the infrared receivers of the TV or VCR, they may not be
operated by their remote control units. In this case, change the installation position of the AV optical receiver.
Note: With some TVs, noise may occur in the picture and sound when the AV optical receiver is exposed to
interference from electromagnetic waves emitted by the TV. In this case, change the position of the AV optical
receiver.
Note: This operation cannot be done if the microphone cap is attached to the camcorder or there is an
obstacle between the camcorder's transmitter and the AV optical receiver.
Note: If infrared light emitted by the edit remote control (provided) strikes the AV optical receiver, noise may
occur in the picture and sound.
Note: Take care not to block the signal during playback, or the picture and sound will not appear on the TV.
Note: The quality of the picture and sound played back through this operation deteriorates slightly. Use the
AV stereo output cable (provided) for higher quality dubbing.
Note: If the AV optical receiver is installed in an AV rack, etc., the distance from which the signal can reach
the receiver from the camcorder may be shorter due to the rack's glass door.
Note: If the AV optical receiver is used with wireless headphones or two camcorders of this type are used
simultaneously, interference may occur.
Note: As the distance to the receiver becomes longer, the picture and sound quality deteriorates. The picture
and sound quality also deteriorates when the distance it too short.
Advanced Techniques
The Hitachi VM-H725LA/H825LA offers a diverse group of features that add interest and excitement to your
video. Adding fades to smooth transitions creates video with a professional look.
As you learn and practice with these features think of situations that they might fit in and add a special touch.
Changing the Angle of the LCD Monitor when Recording
You can change the angle of the LCD monitor so that the picture on the LCD screen can be monitored from
different positions.
See "LCD Monitor" (p. 25) for the range in which you can change the angle of the LCD monitor.
Note: You need the remote control to operate the camcorder.
Recording an Image of Yourself while Monitoring the LCD Screen
1. Open the LCD monitor ("Opening the LCD Monitor", p25).
2. Turn the LCD monitor so the monitor screen faces the same direction as the lens.